Model Guide

Are you a low or high handicapper? Check below which model of club might se suited best to your game. To view the full custom specifications for each club model, click here.

Custom Clubs

Lengths / Swingweights

• For most iron models Mizuno offer lighter weight heads which can be used to keep the swing weight to a standard balance for club lengths up to +1/2" longer. Anything longer than that and the swing weight will increase above the recommended balance. (As a rough calculation, every extra 1/2" in length will increase the swingweight by 3 balance points).
• Irons can be built from 1" shorter than standard up to a maximum of 2" longer than standard.
• Woods can be built +/- 1/2" from standard length but the swingweight will increase by 3 points for +1/2" and reduce by 3 points for -1/2".

Loft and Lie adjustment

• Mizuno irons can be built from 2 degrees flat to 4 degrees upright. In some cases, due to the softness of our forgings, "craftman's" marks on the hosels may result from bending them to the required loft/lie.
• Iron lofts can be adjusted up to 2 degrees stronger than standard (note: making the loft stronger will increase the offset and reduce the bounce angle of the sole).
• No loft or lie adjustments can be made to drivers or fairway woods.
• No loft angle adjustment is possible for MX-100, MX-1000 and Hybrid models.

Grips / Grip Thickness

• Mizuno fit .580 core grips as standard to all men's steel shafts with the exception of Dynamic Gold R300; as they have a smaller butt size a .560 is used.
• Grips can be thickened with up to 5 layers of tape (Tour Velvet Midsize is equivalent to about 5 tapes).

Do you hit the ball high or low? Or can you vary it? Check below to see which model might suit your ball flight the best.